129 Fusor - 210ml Controlled Flow Seam Sealer (Fast)

High Performance – provides excellent adhesion to bare or
primed surfaces.
Versatile – bonds to epoxy or urethane two-component
primed surfaces; weld through with minimal burn back;
tolerates 400°F (204°C) powder coating cure for 30 minutes.
Excellent Appearance – easily duplicates factory
appearance; provides extremely flexible seal with no
shrinkage, cracking or sagging; applies in smooth continuous
beads with no gun lines.
Environmentally Resistant – provides excellent corrosion
protection.
Easy to Finish - can be tooled, but is not required for
factory look, cured sealer may be sanded to a feather-edge.